MSP-EXP430F5529LP
From MAGEEC
Contents
Platform details
| Processor | MSP430F5529 |
| Architecture | MSP430 |
| Instruction sets | MSP430 |
| Memory | 128kB Flash, 8kB RAM |
Hardware modifications
None necessary, attach probes to the 3V3 jumper.
Software setup
udev rules
$ cat /etc/udev/rules.d/62-msp-exp430f5529lp.rules
ATTRS{idVendor}=="2047", ATTRS{idProduct}=="0013", MODE="0666", GROUP="plugdev"
GDB server
To build:
$ git clone git://git.code.sf.net/p/mspdebug/code mspdebug $ cd mspdebug $ make
To run:
$ ./mspdebug ezfet gdb
This starts a gdb server on port 2000, however doesn't seem to allow flashing of the device (although you can debug, and step through programs).
$ wget http://www-s.ti.com/sc/techzip/slac460.zip $ unzip slac460.zip $ cd MSPDebugStack_OS_Package $ wget http://mspdebug.sourceforge.net/misc/slac460f_unix.diff $ patch -p1 <slac460f_unix.diff
$ cd ThirdParty $ chmod +x install_thirdparty.sh $ ./install_thirdparty.sh
$ cd .. $ make $ sudo make install
This creates libmsp430.so, which allows the tilib driver of mspdebug to be used. This seems to be able to successfully flash the board.
$ ./mspdebug tilib gdb
Toolchain
$ apt-get install gcc-msp430 msp430-libc msp430mcu gdb-msp430
