Difference between revisions of "MSP-EXP430F5529LP"

From MAGEEC
Jump to: navigation, search
(Created page with "Category:Hardware ==Platform details== {| |- | Processor || MSP430F5529 |- | Architecture || MSP430 |- | Instruction sets || MSP430 |- | Memory || 128kB Flash, 8kB RAM |}...")
 
(GDB server)
Line 31: Line 31:
 
  $ ./mspdebug ezfet gdb
 
  $ ./mspdebug ezfet gdb
  
This starts a gdb server on port 2000.
+
This starts a gdb server on port 2000, however doesn't seem to allow flashing of the device (although you can debug, and step through programs).
 +
 
 +
$ wget http://www-s.ti.com/sc/techzip/slac460.zip
 +
$ unzip slac460.zip
 +
$ cd MSPDebugStack_OS_Package
 +
 +
$ wget http://mspdebug.sourceforge.net/misc/slac460f_unix.diff
 +
$ patch -p1 <slac460f_unix.diff
 +
 
 +
$ cd ThirdParty
 +
$ chmod +x install_thirdparty.sh
 +
$ ./install_thirdparty.sh
 +
 
 +
$ cd ..
 +
$ make
 +
$ sudo make install
 +
 
 +
This creates libmsp430.so, which allows the tilib driver of mspdebug to be used.
  
 
===Toolchain===
 
===Toolchain===
  
 
  $ apt-get install gcc-msp430 msp430-libc msp430mcu gdb-msp430
 
  $ apt-get install gcc-msp430 msp430-libc msp430mcu gdb-msp430

Revision as of 12:29, 18 November 2013


Platform details

Processor MSP430F5529
Architecture MSP430
Instruction sets MSP430
Memory 128kB Flash, 8kB RAM

Hardware modifications

None necessary, attach probes to the 3V3 jumper.

Software setup

udev rules

$ cat /etc/udev/rules.d/62-msp-exp430f5529lp.rules
ATTRS{idVendor}=="2047", ATTRS{idProduct}=="0013", MODE="0666", GROUP="plugdev"

GDB server

To build:

$ git clone git://git.code.sf.net/p/mspdebug/code mspdebug
$ cd mspdebug
$ make

To run:

$ ./mspdebug ezfet gdb

This starts a gdb server on port 2000, however doesn't seem to allow flashing of the device (although you can debug, and step through programs).

$ wget http://www-s.ti.com/sc/techzip/slac460.zip
$ unzip slac460.zip
$ cd MSPDebugStack_OS_Package

$ wget http://mspdebug.sourceforge.net/misc/slac460f_unix.diff
$ patch -p1 <slac460f_unix.diff
$ cd ThirdParty
$ chmod +x install_thirdparty.sh 
$ ./install_thirdparty.sh 
$ cd ..
$ make
$ sudo make install

This creates libmsp430.so, which allows the tilib driver of mspdebug to be used.

Toolchain

$ apt-get install gcc-msp430 msp430-libc msp430mcu gdb-msp430